FAQ: How To Replace Anode Rod In Rheem Water Heater?

Where is the anode rod in a Rheem water heater?

The anode rod in your Rheem water heater is located on top of your tank. More precisely, your magnesium or aluminum sacrificial anode is visible through a hexagonal head located in the center of your tank under a plastic cover. Refer to your water heater’s user guide for more information.

How long is the anode rod in a Rheem water heater?

Rheem AP12938 Anode Rod, 0.625-Inch Diameter by 42-Inch long, Aluminum.

How do I know if my anode rod is bad?

Smelly or discolored hot water is the biggest sign that something is wrong with your anode rod. When your anode rod has completely corroded, it can no longer protect your hot water heater lining. Your anode rod will go bad every five years or so.

You might be interested:  Quick Answer: What Size Breaker For 240 Volt Heater?

Can I replace anode rod myself?

Water heater anode replacement can be completed by homeowners. If you’d like to inspect or replace your water heater’s anode, follow these steps: For electric water heaters: Turn off the water heater and cut power to the unit from the circuit breaker.

Can a bad anode rod causing rotten egg smell?

The most common cause of smelly water is anaerobic bacteria that exist in some water and react with the magnesium and aluminum sacrificial anodes that come with most water heaters to produce hydrogen sulfide gas, making the classic rotten egg odor. Softening can make smelly water much worse.

Is it OK to remove anode rod?

Yes, you can cut your sacrificial anode rod, whether it is magnesium or aluminum, to replace it. To do this, use a pair of gloves and a saw and cut as you remove the old anode.

Which is better aluminum or magnesium anode rod?

For harder water an aluminum anode rod is the best choice for your heater and if you live in an area with soft water then a magnesium anode rod is your best choice. Aluminum anodes tend to be cheaper than magnesium anode rods. A magnesium rod will generally last less than an aluminum rod.

How much does it cost to replace anode rod?

An anode rod costs about $50. Some homeowners may feel comfortable replacing it themselves. If not, call a professional plumber, who can assist. The cost of having it replaced professionally may be around $250 or $300.

Why does my hot water smell like rotten eggs?

You are most likely on well water, and there is a bacteria, known as SRB (sulfate-reducing bacteria), that gets into water heaters and, although harmless to humans from a pure health perspective, creates the odor by digesting naturally occurring sulfur-based elements in the water, releasing tiny amounts of hydrogen

You might be interested:  Readers ask: How Many Kw Tankless Water Heater Do I Need?

What happens when your anode rod goes bad?

A bad anode rod can cause discolored water, a rotten egg smell, air in the lines and intermittent hot water. The anode rod protects the tank of electric water heaters & signs it should be replaced are a rotten egg smell, no heat & strange sounds.

What happens if you don’t change your anode rod?

Since the lining eventually cracks, tanks have a second line of defense against rust: a long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement.

How often should I replace the anode in my hot water heater?

Most water heater manufacturers will recommend inspecting the condition of the sacrificial anode every one (1) to three (3) years and replacing it when it has been consumed more than 50%. This is especially true if you have hard water or use a water softener.

Is it too late to replace anode rod?

Anode rods are made of either magnesium or an aluminum-zinc alloy. The downside is that if you wait too long to replace the anode rod, it may be too late. If more than five years has passed, it may be too late to save the water heater.

How do I know what size anode rod to buy?

As a rule you want the anode to be “tip to toe” running the full height or length of the tank. If you cant see your brand on the chart then just measure the length of the tank and pick the closest length of anode. If the anode is too long they can be simply cut to length with a hack saw.

You might be interested:  FAQ: Smell Burning Oil When Car Heater Is On?

Should you use Teflon tape on anode rod?

Yes, teflon tape may reduce the effectiveness of the anode rode by electrically insulating the rod from the water heater chassis. The chances of it completely isolating it are nearly impossible though. Use pipe joint compound if you have it, and use teflon tape if you don’t.

Leave a Reply

Your email address will not be published. Required fields are marked *