How To Change A Water Heater Thermostat?

How do I know if my water heater thermostat is bad?

If you turn the hot water tap and cold water runs out, then the upper thermostat is damaged. But if the water is hot that becomes later becomes cold, then you have a damaged lower thermostat.

Do you have to drain a hot water heater to change the thermostat?

Always disconnect the power or shut off the breaker before doing any work on a water heater. To change thermostats, you will need to remove the access panel and safety cover (do this for both upper and lower access panels on dual element units).

Where is the thermostat located in a water heater?

Electric water heaters often have two thermostats — one at the top and another at the bottom of the tank. And most tankless water heaters feature a display with a temperature readout and controls for adjusting the temperature.

You might be interested:  How Much Does An Electric Heater Cost Per Month?

How much does it cost to replace a water heater thermostat?

The average thermostat replacement cost is between $100 and $300. Most other repairs are equally affordable. There are two main types: gas and electric.

How do I reset my water heater thermostat?

Somewhere on your electric water heater, you’ll find a reset button. It’s usually red and often located near the thermostat. It may also be hidden behind a removable metal panel on the unit—and then behind some insulation. Once you find the button, push and release it.

What trips the reset button on a hot water heater?

The reset button: a red button located on the water heater itself (just above the thermostat) that trips when the water temperature exceeds 180 F. The reset button is sometimes referred to as the “ECO” (emergency cut off) or “high limit switch”.

What causes a water heater thermostat to burn up?

Usually the cause of overheated water is a lower heating element that has a leak to ground. You need to turn power off to the heater. Disconnect both wires to both elements.

Why do I have to keep resetting my hot water heater?

The reset button usually trips for safety to prevent the tank from overheating and potentially becoming a bomb. If your heater is continuously tripping you should call a Orlando plumbing company to replace the thermostats. We usually recommend replacing all old components with new parts this includes the elements.

Are water heater thermostats universal?

There are more than 50 brands of residential tank type electric water heaters in the U.S., most thermostats are interchangeable, however, read the product description carefully. If you must replace a thermostat its always a good idea to replace both thermostats at the same time.

You might be interested:  Question: How To Make A Heater Out Of Cans?

How do I know if my thermostat is working properly?

The most common signs of a broken thermostat are:

  1. Thermostat display is off or is non-responsive.
  2. Turning on the heat or AC does nothing.
  3. The heat or AC will come on, but either stays on nonstop or cuts out before the temperature setting is reached.

Is 130 too hot for water heater?

Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.

Should both thermostats on water heater be set the same?

The majority of electric water heaters have two thermostats: an upper and a lower, located under two control panels. To ensure your electric water heater works as efficiently as possible, you should set both of the thermostats at the same temperature.

Can you replace the thermostat on a gas water heater?

The water heater thermostat is part of the gas valve. They cannot be replaced separately from the valve.

Leave a Reply

Your email address will not be published. Required fields are marked *