- 1 What do you do when your pilot light goes out?
- 2 Can I relight the pilot light by myself?
- 3 Is it safe to relight water heater pilot?
- 4 Can I manually light my gas water heater?
- 5 Should pilot light always be on water heater?
- 6 Do I need to turn gas off if pilot light goes out?
- 7 Is it bad if your pilot light goes out?
- 8 What would cause the pilot light to go out?
- 9 How much does it cost to relight a pilot?
- 10 How do I know if my pilot light is out?
- 11 Why does my hot water tank pilot light keep going out?
- 12 What does it mean when your hot water heater won’t stay lit?
What do you do when your pilot light goes out?
How to Relight a Pilot Light
- Turn off your appliance at the power switch or thermostat.
- Find the gas valve control knob and turn it to select “pilot.”
- If pilot light controls are sticky, do not apply force or use oil.
- Press the red button while simultaneously holding a match to the pilot burner.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
Is it safe to relight water heater pilot?
Do not attempt to relight a water heater pilot light (or any other work on the unit) if you smell gas in the area, indicating a gas leak; call 9-1-1 from outside the house. Herb Kirchhoff has more than three decades of hands-on experience as an avid garden hobbyist and home handyman.
Can I manually light my gas water heater?
Lighting the Pilot Light on a Manual Hot Water Heater If your hot water heater is a manual, grab a long lighter. Turn the pilot dial to the off position and wait 5-10 minutes for any gas to dissipate. Then, turn the pilot dial until it says the word pilot. After that, set your temperate knob to low.
Should pilot light always be on water heater?
The pilot should be on the water heating the house. The pilot flame can be difficult to see through a window. To know if the pilot is on or off, you need to remove the access door and shield and look at the burner and pilot through it.
Do I need to turn gas off if pilot light goes out?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
Is it bad if your pilot light goes out?
The pilot light is a small, blue flame that is used to ignite the natural gas being pumped into the main burner. This tube is fitted with a safety valve (the thermocouple), which stops the flow of gas if the pilot light goes out. This prevents gas from building up in your furnace, posing a safety hazard.
What would cause the pilot light to go out?
Sometimes a pilot light can go out as a result of some source of wind or air simply blowing it out. If this happens, there could be an issue with how your flue pipe is set up or how your system is venting.
How much does it cost to relight a pilot?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100. Have you ever relit your own pilot light?
How do I know if my pilot light is out?
How to Tell If the Pilot Light Is Out
- Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
- If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
- If you don’t see a flame, your pilot light is out.
- If there is a flame, check the color.
Why does my hot water tank pilot light keep going out?
If the pilot light goes out, the thermocouple senses the drop in temperature and signals for the gas valve to close. If you have a faulty thermocouple is the most common reason that your pilot light is malfunctioning. Over time your water heater will collect dirt, dust and other kinds of debris.
What does it mean when your hot water heater won’t stay lit?
Thermocouple. If your gas water heater doesn’t stay lit, you may have a defective thermocouple. Most gas fired water heaters use a standing pilot to ignite the main burner. Changing the thermocouple does not involve any gas fittings but local regulations may require that a qualified gas technician perform the repair.