How To Replace The Anode Rod In A Water Heater?

How do I know if my anode rod is bad?

Smelly or discolored hot water is the biggest sign that something is wrong with your anode rod. When your anode rod has completely corroded, it can no longer protect your hot water heater lining. Your anode rod will go bad every five years or so.

How often should you replace the anode rod in a water heater?

Most water heater manufacturers will recommend inspecting the condition of the sacrificial anode every one (1) to three (3) years and replacing it when it has been consumed more than 50%. This is especially true if you have hard water or use a water softener.

How much does it cost to replace a water heater anode rod?

An anode rod costs about $50. Some homeowners may feel comfortable replacing it themselves. If not, call a professional plumber, who can assist. The cost of having it replaced professionally may be around $250 or $300.

You might be interested:  How To Turn Up Hot Water Heater Electric?

Can you run a water heater without an anode rod?

Without a working anode rod, your water heater tank will be vulnerable to rust, corrosion, and other damaging effects of chemicals and minerals in your water supply.

Is it OK to remove anode rod?

Yes, you can cut your sacrificial anode rod, whether it is magnesium or aluminum, to replace it. To do this, use a pair of gloves and a saw and cut as you remove the old anode.

What happens when your anode rod goes bad?

A bad anode rod can cause discolored water, a rotten egg smell, air in the lines and intermittent hot water. The anode rod protects the tank of electric water heaters & signs it should be replaced are a rotten egg smell, no heat & strange sounds.

Can anode rod causing rotten egg smell?

The most common cause of smelly water is anaerobic bacteria that exist in some water and react with the magnesium and aluminum sacrificial anodes that come with most water heaters to produce hydrogen sulfide gas, making the classic rotten egg odor. Softening can make smelly water much worse.

Is it too late to replace anode rod?

Anode rods are made of either magnesium or an aluminum-zinc alloy. The downside is that if you wait too long to replace the anode rod, it may be too late. If more than five years has passed, it may be too late to save the water heater.

Why does my hot water smell like rotten eggs?

You are most likely on well water, and there is a bacteria, known as SRB (sulfate-reducing bacteria), that gets into water heaters and, although harmless to humans from a pure health perspective, creates the odor by digesting naturally occurring sulfur-based elements in the water, releasing tiny amounts of hydrogen

You might be interested:  Readers ask: How Many Amps Does A Water Heater Use?

Can I replace anode rod myself?

Water heater anode replacement can be completed by homeowners. If you’d like to inspect or replace your water heater’s anode, follow these steps: For electric water heaters: Turn off the water heater and cut power to the unit from the circuit breaker.

How long does an anode rod last in a hot water heater?

When there’s no sacrificial metal left on the anode rod, your water heater tank can rust out, eventually causing it to burst. Anode rods generally can last about three to five years but it really depends mostly on the quality of your water and how much water travels through your water heater.

How much does it cost to flush out a water heater?

How much does it cost to flush a water heater? If you’re not confident doing the job yourself, expect to pay around $100. This is really a minimal expense considering how damaging sediment can be for your water heater.

Do water softeners destroy water heaters?

SHORT: Dont’ do it. It destroys tank water heaters. LONG: The ion exchange that happens inside the softener swaps calcium and magnesium for sodium. Sodium is a great conductor of electricity.

Will a bad anode rod make water smell?

Many anode rods are made of magnesium or aluminum. When these rods corrode, the metals react with the sulfates in the water, turning the sulfate into stinky hydrogen sulfide.

Which is better magnesium or aluminum anode rod?

For harder water an aluminum anode rod is the best choice for your heater and if you live in an area with soft water then a magnesium anode rod is your best choice. Aluminum anodes tend to be cheaper than magnesium anode rods. A magnesium rod will generally last less than an aluminum rod.

Leave a Reply

Your email address will not be published. Required fields are marked *