- 1 How do you relight a pilot light on a water heater?
- 2 Can I relight the pilot light by myself?
- 3 What do I do if my pilot light won’t light?
- 4 Is it safe to light pilot on water heater?
- 5 What causes a pilot light to go out on a water heater?
- 6 Why does my pilot light keep going out on my hot water tank?
- 7 How much does it cost to relight a pilot?
- 8 How do I know if my pilot light is out?
- 9 Should the pilot light always be on in a gas heater?
- 10 How do you know if you have a bad thermocouple?
- 11 How much does it cost to fix a thermocouple?
- 12 Why is my water heater not igniting?
- 13 Can I manually light my gas water heater?
- 14 Will gas leak if pilot light is off?
- 15 Can a water heater explode?
How do you relight a pilot light on a water heater?
How to Light a Water Heater Pilot Light
- Open the door/cover over the pilot light access.
- Use a flashlight or a headlamp to find the burner inside.
- Turn the gas knob to “Pilot,” press and hold it down.
- While still holding the gas down, light that pilot.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
What do I do if my pilot light won’t light?
How to Fix Your Pilot Light
- Find your gas valve.
- You need to turn the valve to the off position for at least three minutes.
- Once you have had the valve at off for a few minutes, switch it over to pilot setting.
- You will need a match that is lit.
- Set the pilot valve to the on position.
Is it safe to light pilot on water heater?
Before You Strike a Flame If so, attempting to light the pilot at this point is extremely dangerous and could cause an explosion. Turn off the gas line to your water heater and wait 1 hour. Turn the gas back on, wait 10 minutes, and sniff again. If the problem persists, call a qualified gas technician.
What causes a pilot light to go out on a water heater?
Some of the most common reasons that water heater pilot lights go out include: A faulty thermocouple. Over time, thermocouples can begin to malfunction and shut off the gas supply to the pilot light even if it’s burning properly. A bent or dirty thermocouple.
Why does my pilot light keep going out on my hot water tank?
The most common reason that your pilot light on your water heater keeps going out is a damaged, bent or dirty thermocouple.
How much does it cost to relight a pilot?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100. Have you ever relit your own pilot light?
How do I know if my pilot light is out?
How to Tell If the Pilot Light Is Out
- Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
- If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
- If you don’t see a flame, your pilot light is out.
- If there is a flame, check the color.
Should the pilot light always be on in a gas heater?
Most furnaces with electronic ignition have a device called a hot surface igniter. The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
How do you know if you have a bad thermocouple?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
How much does it cost to fix a thermocouple?
The thermocouple is an apparatus that senses whether the pilot light is lit and triggers the gas control valve. Repairs typically cost about $150 to have it done professionally, though a new thermocouple itself only costs about $20 on average.
Why is my water heater not igniting?
The water heater pilot light is a small flame that ignites the gas burner on your water heater. If the pilot doesn’t relight, if it goes out right after lighting or if it goes out repeatedly, by far the most common cause is a bad thermocouple.
Can I manually light my gas water heater?
Lighting the Pilot Light on a Manual Hot Water Heater If your hot water heater is a manual, grab a long lighter. Turn the pilot dial to the off position and wait 5-10 minutes for any gas to dissipate. Then, turn the pilot dial until it says the word pilot. After that, set your temperate knob to low.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
Can a water heater explode?
Water heater explosions are terrifying, and they can happen. Anything that causes excess pressure on your water heating system, such as a poor anode rod, or a lot of sediment buildup, can all cause your water heater to explode. A gas leak can also cause your water heater to explode because it is a tremendous fire risk.