Often asked: How To Relight The Water Heater?

Can I relight my hot water heater?

Tank-type gas water heaters use a pilot light to ignite the gas burner when the water in the tank needs to be heated. Usually, the first warning that your pilot light has gone out is the cold water coming from the hot water tap. If your heater’s pilot goes out, you can relight it yourself.

How do you reignite a water heater?

How to Reignite a Gas Water Heater in 7 Steps

  1. Open the door or cover that is protecting the pilot light access.
  2. Use a flashlight or headlamp to locate the burner.
  3. Gently turn the gas knob to the “Pilot” setting and hold it down.
  4. While holding the gas knob or button down, light the pilot.

How do you relight a pilot light on a water heater?

How to Light a Water Heater Pilot Light

  1. Open the door/cover over the pilot light access.
  2. Use a flashlight or a headlamp to find the burner inside.
  3. Turn the gas knob to “Pilot,” press and hold it down.
  4. While still holding the gas down, light that pilot.
You might be interested:  Why Is My Hot Water Heater Hissing?

What do you do when you have no hot water?

Solved! What to Do When There’s No Hot Water

  1. Bump up the thermostat.
  2. Relight the pilot light.
  3. Fix a faulty thermocouple.
  4. Rekindle a blue flame.
  5. Inspect the gas line.
  6. Restart your water heater.
  7. Reset the circuit breaker.
  8. Call in the professionals.

How long does a hot water heater last?

Typically a residential hot water heater lasts between 6 and 13 years. Beyond 12 years, you are on borrowed time!

What causes a pilot light to go out on a water heater?

Some of the most common reasons that water heater pilot lights go out include: A faulty thermocouple. Over time, thermocouples can begin to malfunction and shut off the gas supply to the pilot light even if it’s burning properly. A bent or dirty thermocouple.

Does a water heater have a pilot light?

The water heater pilot light is a small flame that ignites the gas burner on your water heater. When the water heater pilot light goes out, first try relighting it, following the directions on the water heater label.

Can you repair a hot water heater?

A water heater can certainly be repaired, generally depending on what is going on when a plumber is called out for water heater repair. As per the common problems listed above, the general consensus for these tends to be a parts replacement, a reset of the system, or a flush of your water heater.

Can I relight the pilot light by myself?

If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.

You might be interested:  FAQ: How Do You Flush A Heater Core?

What do you do if the pilot light goes out?

Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.

How do I know if pilot light is out?

How to Tell If the Pilot Light Is Out

  1. Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
  2. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
  3. If you don’t see a flame, your pilot light is out.
  4. If there is a flame, check the color.

Can I manually light my gas water heater?

Lighting the Pilot Light on a Manual Hot Water Heater If your hot water heater is a manual, grab a long lighter. Turn the pilot dial to the off position and wait 5-10 minutes for any gas to dissipate. Then, turn the pilot dial until it says the word pilot. After that, set your temperate knob to low.

Why is my gas water heater not working?

If a gas water heater isn’t heating, a common problem is usually that the pilot light has gone out. This may be caused by the gas valve, the natural gas supply, or—more likely—the thermocouple located next to the pilot light.

Can a water heater explode?

Water heater explosions are terrifying, and they can happen. Anything that causes excess pressure on your water heating system, such as a poor anode rod, or a lot of sediment buildup, can all cause your water heater to explode. A gas leak can also cause your water heater to explode because it is a tremendous fire risk.

Leave a Reply

Your email address will not be published. Required fields are marked *