Question: How To Replace Water Heater Thermocouple?

Can I replace a thermocouple myself?

It’s easy to replace and a new one costs $5 to $10. Rather than trying to unfasten the thermocouple inside the water heater’s burning chamber, it’s easier to remove the whole burner and thermocouple assembly. Then unfasten the three nuts that hold the thermocouple and the two gas tubes to the valve.

How do you know if you have a bad thermocouple?

If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.

Do you have to drain the water heater to change the thermocouple?

Removing and replacing a gas valve requires you to completely drain the water heater, turn off the gas control valve, turn off the gas and water supply. But that’s just the first step.

You might be interested:  Question: What Is A Heater Coil?

How much should a plumber charge to replace a thermocouple?

Thermocouple Replacement Cost Calling a professional plumber to install a new thermocouple should only be up to $150. If you do the work yourself, you will only pay the price of the part which is about $20.

How much does it cost to fix a thermocouple?

The thermocouple is an apparatus that senses whether the pilot light is lit and triggers the gas control valve. Repairs typically cost about $150 to have it done professionally, though a new thermocouple itself only costs about $20 on average.

What causes thermocouple to fail?

Changes in temperature can cause regular expansion and contraction in metal, which will cause thermocouples to weaken over time. After enough time, metal fatigue can cause a thermocouple to break. If thermocouples start to give out unusual readings, it may be suffering from metal fatigue.

Can you clean a thermocouple?

The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.

Can you fix a thermocouple?

If the pilot lights but the flame goes out as soon as you release the button after holding it for 60 seconds, then the thermocouple is bad. It’s possible to replace the thermocouple without removing the burner assembly, and many repair people do this.

How long does a thermocouple last on a water heater?

All things considered, the question remains, “How long should my thermocouple last?” The answer to that question is that it depends on the application. In an ideal environment, that length of time can be indefinite.

You might be interested:  FAQ: Why Is My Hot Water Heater?

Are hot water heater thermocouples universal?

Universal Thermocouples. Universal thermocouples, as the name implies work on most water heaters. They are available online and in home supply stores for a reasonable cost. The length and the thread type are the two concerns when purchasing one.

What causes water heater pilot to go out?

A dirty thermocouple is the most common cause of malfunctioning water heater pilot light. Because the tip of the thermocouple is exposed to a direct flame, carbon can build up and cause the flame to malfunction or go out.

Why does my hot water heater pilot keep going out?

Why does the pilot light on my water heater keep going out? Your water heater pilot light keeps going out due to issues with the heater’s thermocouple or access to combustible air.

How long do water heaters last?

How Long Do Water Heaters Last? Based on the manufacturer’s suggested service life, the life expectancy of a water heater is about eight to 12 years. That varies with the location and design of the unit, quality of installation, maintenance schedule and water quality.

Leave a Reply

Your email address will not be published. Required fields are marked *