Question: Why Does Pilot Light Go Out On Water Heater?

What do you do when your hot water heater pilot light goes out?

If the flame remains lit, you’re good to go! Simply replace the cover plate, turn the control knob to β€œOn,” and select the desired temperature on the water temperature knob so that you can return to a refreshing hot shower.

What causes a pilot light to go out?

Improper Venting & Airflow Sometimes a pilot light can go out as a result of some source of wind or air simply blowing it out. If this happens, there could be an issue with how your flue pipe is set up or how your system is venting.

How much does it cost to replace a thermocouple on a water heater?

Thermocouple – $20 to $150 The thermocouple is an apparatus that senses whether the pilot light is lit and triggers the gas control valve. Repairs typically cost about $150 to have it done professionally, though a new thermocouple itself only costs about $20 on average.

You might be interested:  Quick Answer: What Is The Cheapest Electric Heater To Run?

Do I need to turn gas off if pilot light goes out?

If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.

Should pilot light always be on water heater?

The pilot should be on the water heating the house. The pilot flame can be difficult to see through a window. To know if the pilot is on or off, you need to remove the access door and shield and look at the burner and pilot through it.

How much does it cost to relight a pilot?

Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100. Have you ever relit your own pilot light?

What are the symptoms of a bad thermocouple?

Failed Thermocouple Symptoms

  • Signs of contamination on the tube, e.g. discoloration, cracks, or pinholes.
  • Signs of wear or corrosion of the wirings, e.g. missing insulation or bare wire.
  • Physical damage to the connectors which can have an effect on the reliability of the test reading.

How do you know if you have a bad thermocouple?

If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.

You might be interested:  Quick Answer: How To Reset Hot Water Heater?

Can I replace a thermocouple myself?

It’s easy to replace and a new one costs $5 to $10. Rather than trying to unfasten the thermocouple inside the water heater’s burning chamber, it’s easier to remove the whole burner and thermocouple assembly. Then unfasten the three nuts that hold the thermocouple and the two gas tubes to the valve.

What is the lifespan of a water heater?

Based on the manufacturer’s suggested service life, the life expectancy of a water heater is about eight to 12 years. That varies with the location and design of the unit, quality of installation, maintenance schedule and water quality.

What is the most common problem with water heaters?

A water tank that produces too little hot water is one of the many common water heater problems you may encounter. Usually this can be solved by turning up the temperature on the tank’s thermostat. Be careful, however, not to turn the temperature up too high, as this can be a scalding hazard. No hot water.

Can you get carbon monoxide poisoning from a pilot light?

A pilot light should be a crisp blue colour. A yellow or orange pilot light will produce carbon monoxide – an odourless, colourless gas that can fill your home and cause carbon monoxide poisoning. Symptoms of this condition include dizziness, headache, fatigue, nausea, unconsciousness, brain damage and death.

Can a pilot light relight itself?

Relighting a pilot light may be possible, depending on the type you have. By design, an automatic pilot light does not need to be lighted or relighted; it turns on and off by itself. If an automatic pilot or igniter is failing to light the burners on your appliance, it typically needs to be replaced.

You might be interested:  FAQ: How To Install Solar Water Heater On Roof?

Will you smell gas if pilot light goes out?

This system will allow a small amount of gas to leak through the pilot tubing. If the pilot light is out, the gas must be shut off at the appliance isolation valve, normally located in close proximity to the appliance. If you notice an odor of gas, contact Peoples’ emergency number at 1-800-400-4271.

Leave a Reply

Your email address will not be published. Required fields are marked *