Quick Answer: How To Troubleshoot An Electric Water Heater?

What causes an electric hot water heater to stop working?

If an electric water heater is not producing hot water, it could be a simple problem like a blown fuse or tripped circuit breaker. Additionally, some electric water heaters have a circuit-style safety switch located near or on the thermostat. For gas water heaters, it could be as straightforward as being out of gas.

How do you reset an electric water heater?

Somewhere on your electric water heater, you’ll find a reset button. Then, push the water heater reset button(s).

  1. If your water heater now has power, you’re all set.
  2. If your water heater still doesn’t work, flip the breaker to OFF, and call us so we can determine what’s happening and get hot water flowing again.

How do I know if my electric hot water heater is working?

7 Tell-tale signs of a Water Heater not working

  1. You don’t have enough hot water.
  2. You have varying water temperature issues.
  3. You have a leaking water heater.
  4. You notice reduced water flow.
  5. You’re hearing some concerning sounds.
  6. You have smelly or discolored water.
  7. Your water heater is on the older end of the spectrum.
You might be interested:  How Much Gas Does A Hot Water Heater Use?

What is the most common problem with water heaters?

A water tank that produces too little hot water is one of the many common water heater problems you may encounter. Usually this can be solved by turning up the temperature on the tank’s thermostat. Be careful, however, not to turn the temperature up too high, as this can be a scalding hazard. No hot water.

What trips the reset button on a hot water heater?

The reset button: a red button located on the water heater itself (just above the thermostat) that trips when the water temperature exceeds 180 F. The reset button is sometimes referred to as the “ECO” (emergency cut off) or “high limit switch”.

How long do electric water heaters last?

While today’s water heaters are better designed than older models, they still require regular maintenance in order to prolong their lives. With regular inspection, draining, and flushing, you can expect a gas water heater to last anywhere from 8-12 years and an electric water heater to last anywhere from 10-15 years.

Do electric water heaters have a fuse?

The heater is usually fused in the main electrical panel but some electric water heaters may be fed from a separate fuse or circuit breaker box. If the fuse is blown or breaker is tripped, replace the fuse or re-set the circuit breaker. Instructions for setting the water heater timer are inside the timer cover.

When should you use the reset button on a hot water heater?

Your water heater reset button is a safety device that shuts off power to your water heater when the water temperature inside it exceeds 180 degrees Fahrenheit. Side note: the reset button is also sometimes referred to as the ECO (emergency cut off) switch or “high limit safety thermostat switch”.

You might be interested:  Quick Answer: How Does Webasto Heater Work?

What to check when there’s no hot water?

Solved! What to Do When There’s No Hot Water

  • Bump up the thermostat.
  • Relight the pilot light.
  • Fix a faulty thermocouple.
  • Rekindle a blue flame.
  • Inspect the gas line.
  • Restart your water heater.
  • Reset the circuit breaker.
  • Call in the professionals.

Why can’t I reset my water heater?

What do you do if the water heater reset button doesn’t reset? You might have a faulty thermostat. If the hot water heater keeps tripping the reset button, the cause may be the high limit switch. What’s happening is that the thermostat is not properly managing the heat.

Can you change a water heater element without draining the tank?

It is possible to change your water heater’s heating element without draining your tank. Although, keep in mind that it can be a bit more challenging.

Leave a Reply

Your email address will not be published. Required fields are marked *