- 1 Does a plumber or electrician install a tankless water heater?
- 2 Can I install tankless water heater myself?
- 3 Where should a tankless water heater be installed?
- 4 What is the downside of a tankless water heater?
- 5 Is it worth switching to a tankless water heater?
- 6 Why do tankless water heaters cost more to install?
- 7 How long does it take to install a tankless water heater?
- 8 What size breaker do I need for a tankless water heater?
- 9 Do you need a drain for a tankless water heater?
- 10 How do I know what size tankless water heater I need?
- 11 How much does a tankless water heater cost with installation?
- 12 What are the power requirements for a tankless water heater?
- 13 How hard is it to install a tankless gas water heater?
Does a plumber or electrician install a tankless water heater?
You might also need to hire an electrician, depending on the type of tankless water heater you’re installing, whether you already have the necessary hookups in place, and the plumber’s skills. Either way, you should get estimates from several contractors before you select one or two to do the installation work for you.
Can I install tankless water heater myself?
Installation. While it is possible to install your own tankless water heater, it’s not a job for inexperienced do-it-yourselfers. There are a number of different sizes and styles of tankless water heaters, including propane, natural gas and electric, along with single-room or whole-house sized models.
Where should a tankless water heater be installed?
The ideal location for your water heater is inside the home. Most installations are small and unobtrusive so they will easily fit in a pantry, under the stairs, or under your sink. If you must place the water heater outside, make sure it’s safe from direct sunlight, rain, and insects.
What is the downside of a tankless water heater?
The primary disadvantage of on demand or instant hot water heaters is the upfront cost. The smaller units that you often see won’t produce enough hot water to serve most households. They’ll only serve one faucet at a time—a problem if you want to shower while the dishwasher is running.
Is it worth switching to a tankless water heater?
The big advantage of tankless water heaters is that they use less energy since they only heat up water when you need it. You can save hundreds on your energy bill each year. Because they don’t waste power, you can also enjoy the fact that your home will be more sustainable and eco-friendly.
Why do tankless water heaters cost more to install?
In general, purchasing and installing a tankless water heater costs about 2 to 2.5 times as much as a standard water heater because of the higher production costs of the unit, venting, and resizing the gas line and gas meter required to support the unit’s demand.
How long does it take to install a tankless water heater?
Placing the new tankless water heater shouldn’t last more than half an hour. The plumber has to bring the new unit, take it out of the box and handle it for the later mount. Connecting the system may take somewhere between 45 and 60 minutes.
What size breaker do I need for a tankless water heater?
Typical tankless requires 40-50 amp breaker for each wire. Each wire supplies 1 element. This example requires 3 breakers rated 40-50 amp = 120+ total amps.
Do you need a drain for a tankless water heater?
Every major brand of tankless requires a drain pan if the unit is installed where a leak can cause damage to the home or building. Architects and engineers understand that when a tankless water heater reaches the end of its life it will likely leak, just like a tank.
How do I know what size tankless water heater I need?
How to Select the Right Size Tankless Water Heater
- Determine the maximum number of devices you want to run and their total flow rate. Then, add up their flow rates (gallons per minute).
- Determine required temperature rise.
- Sizing Example: An average shower will be between 104–106° and uses 2.6 gallons of water.
How much does a tankless water heater cost with installation?
The gas tankless water heater installation cost would be in the $1200 to $3000 range if switching from electric to gas. You do save about $250 because you do not need a tempering valve installed with a gas tankless water heater installation.
What are the power requirements for a tankless water heater?
Unfortunately, the average electric tankless water heater needs at least 120 amps to operate and the average household’s total capacity is 200 amps. This means you will have to upgrade your electrical system to accommodate for the larger load demand, which could cost you up to $1,500.
How hard is it to install a tankless gas water heater?
Tankless water heaters cost more than traditional tank water heaters; typically about twice the price for the unit alone, depending on what flow rate is needed. They’re also more difficult to install, as they have special venting requirements and often need larger gas lines because of the higher BTU rating.