Readers ask: How To Relight Water Heater?

How do you relight a pilot light on a water heater?

How to Light a Water Heater Pilot Light

  1. Open the door/cover over the pilot light access.
  2. Use a flashlight or a headlamp to find the burner inside.
  3. Turn the gas knob to “Pilot,” press and hold it down.
  4. While still holding the gas down, light that pilot.

Can I relight the pilot light by myself?

If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.

Is it safe to relight your water heater?

While it is not typically dangerous for the pilot light to go out, you will need to relight it if you want hot water. Although an unlit pilot light is usually not dangerous, if you notice a rotten egg smell in the room where your water heater is located, you need to turn off the gas and call the gas company.

You might be interested:  Why Does Lowering The Temperature Setting Of Your Water Heater Save Energy?

How do you reignite a water heater?

How to Reignite a Gas Water Heater in 7 Steps

  1. Open the door or cover that is protecting the pilot light access.
  2. Use a flashlight or headlamp to locate the burner.
  3. Gently turn the gas knob to the “Pilot” setting and hold it down.
  4. While holding the gas knob or button down, light the pilot.

What do I do if my water heater won’t light?

If you have a natural or propane gas water heater, chances are the pilot has gone out. If the pilot doesn’t relight, if it goes out right after lighting or if it goes out repeatedly, by far the most common cause is a bad thermocouple.

Why do pilot lights go out on water heaters?

Some of the most common reasons that water heater pilot lights go out include: A faulty thermocouple. Over time, thermocouples can begin to malfunction and shut off the gas supply to the pilot light even if it’s burning properly. A bent or dirty thermocouple.

How much does it cost to relight a water heater?

Pilot Light Assessment and Reignition Cost If you follow safe procedures, you can relight this component on your own. This would save you a service call fee, which could range from $45 to $150 per hour. If it doesn’t light, you could have thermocouple or valve issues.

What do I do if pilot light goes out?

Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.

You might be interested:  Often asked: How Much Does A 40 Gallon Water Heater Cost?

How do I know if my pilot light is out?

How to Tell If the Pilot Light Is Out

  1. Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
  2. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
  3. If you don’t see a flame, your pilot light is out.
  4. If there is a flame, check the color.

How long do water heaters last?

How Long Do Water Heaters Last? Based on the manufacturer’s suggested service life, the life expectancy of a water heater is about eight to 12 years. That varies with the location and design of the unit, quality of installation, maintenance schedule and water quality.

What does it mean when your hot water heater won’t stay lit?

Thermocouple. If your gas water heater doesn’t stay lit, you may have a defective thermocouple. Most gas fired water heaters use a standing pilot to ignite the main burner. Changing the thermocouple does not involve any gas fittings but local regulations may require that a qualified gas technician perform the repair.

Should I smell gas from my water heater?

Is it normal for a hot water heater to smell like gas? The short answer is, “No.” Here’s the long answer: Natural gas is odorless. If this is the case, you likely have an issue with hydrogen sulfide gas in your water and may need to replace the anode with another type that won’t produce this type of odor.

How long does it take for hot water heater to heat up?

The average gas heater takes between 30 and 40 minutes to fully heat up the water in its tank. The average electric heater takes about twice as long as the average gas heater to fully heat up the water in its tank, so you can expect it to take between an hour and an hour and 20 minutes to heat up.

You might be interested:  Quick Answer: How Does A Parabolic Heater Work?

Can you repair a hot water heater?

A water heater can certainly be repaired, generally depending on what is going on when a plumber is called out for water heater repair. As per the common problems listed above, the general consensus for these tends to be a parts replacement, a reset of the system, or a flush of your water heater.

Do hot water heaters have a pilot light?

If you find your hot water is suddenly running cold, the first step in solving the problem is to check the pilot light on your hot water heater hasn’t gone out. The pilot light is a small flame that lights the main burner whenever the tank needs heating and should be on at all times.

Leave a Reply

Your email address will not be published. Required fields are marked *