- 1 What should water heater thermostats be set at?
- 2 How do I adjust the thermostat on my hot water heater?
- 3 Why does my water heater have 2 thermostats?
- 4 Should both thermostats on water heater be set the same?
- 5 Is 150 too hot for water heater?
- 6 Is 130 too hot for water heater?
- 7 What is the best temperature for a hot water heater?
- 8 Does turning up water heater make hot water last longer?
- 9 Where is the thermostat in a hot water heater?
- 10 How many thermostats does a hot water heater have?
What should water heater thermostats be set at?
The short answer: 120 degrees Fahrenheit. This is the preset thermostat temperature in most new water heaters, and it’s the recommended setting of the U.S. Department of Energy. At this temperature, harmful pathogens like the kind that cause Legionnaires’ disease are prevented from multiplying and may be killed.
How do I adjust the thermostat on my hot water heater?
Start by turning off power to the water heater at the circuit breaker. Find the access panel for the thermostat(s) and use a screwdriver to remove the panel. Peel back the insulation. Use a flathead screwdriver to adjust the thermostat up or down.
Why does my water heater have 2 thermostats?
A dual-element water heater uses two heating elements controlled by two separate thermostats. The upper element heats the upper portion of the water column. Depending on your water usage, the temperature can be lowered. This uses less electricity, lowering your electricity bill.
Should both thermostats on water heater be set the same?
The majority of electric water heaters have two thermostats: an upper and a lower, located under two control panels. To ensure your electric water heater works as efficiently as possible, you should set both of the thermostats at the same temperature.
Is 150 too hot for water heater?
The recommended setting for household water heaters is not 150 degrees, but slightly less _ 140 degrees. Water temperatures higher than 140 degrees can burn the skin and are particularly dangerous for young children and the elderly. People with poor circulation can scald themselves without knowing it.
Is 130 too hot for water heater?
Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.
What is the best temperature for a hot water heater?
120 degrees Fahrenheit is the safety recommendation against scalding, but 140° is the common default setting. Most experts agree that anything below 120 degrees creates a risk for bacteria to develop inside your water heater from stagnant water, such as legionella that causes Legionnaire’s disease.
Does turning up water heater make hot water last longer?
Turn up the thermostat on the hot water heater. One of the easiest ways to make a hot shower last longer is by using less hot water while it’s at a higher temperature. To do this, turn up the temperature on the thermostat that’s attached to the hot water heater tank. Be conscious of other hot water in your home.
Where is the thermostat in a hot water heater?
Most water heaters have two thermostats. The are attached to the side of the tank. The locations of the thermostats are beside two removable plates on the side of the water heater. You have to remove the metal covers on the outside of the hot water tank first.
How many thermostats does a hot water heater have?
Most electric water heaters above 20 gallons have two thermostats that sense the temperature of the water in both the top and bottom of the tank. The upper thermostat is the boss and always tells the lower thermostat what to do.