Readers ask: What Temperature Should Your Water Heater Be Set At?

Is 140 too hot for water heater?

The Occupational Safety & Health Administration (OSHA) recommends water heaters be set to at least 140 degrees Fahrenheit (60 degrees Celsius) to minimize the growth of Legionella and other microorganisms.

Is 130 too hot for water heater?

Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.

What should my hot water tank thermostat be set at?

The short answer: 120 degrees Fahrenheit. This is the preset thermostat temperature in most new water heaters, and it’s the recommended setting of the U.S. Department of Energy. At this temperature, harmful pathogens like the kind that cause Legionnaires’ disease are prevented from multiplying and may be killed.

You might be interested:  How To Bend Acrylic With A Strip Heater?

What temperature should I put my heater on?

According to ENERGY STAR, setting your thermostat to 68 degrees Fahrenheit (20 degrees Celsius) when you’re home is the ideal balance of comfort and energy efficiency.

Is 150 too hot for water heater?

The recommended setting for household water heaters is not 150 degrees, but slightly less _ 140 degrees. Water temperatures higher than 140 degrees can burn the skin and are particularly dangerous for young children and the elderly. People with poor circulation can scald themselves without knowing it.

Can 140 degrees burn you?

Most adults will suffer third-degree burns if exposed to 150 degree water for two seconds. Burns will also occur with a six-second exposure to 140 degree water or with a thirty second exposure to 130 degree water. Even if the temperature is 120 degrees, a five minute exposure could result in third-degree burns.

Is 135 too hot for water heater?

The American Society of Sanitary Engineering recommends that hot water tanks be set from 135 to 140 degrees, to inhibit the growth of Legionella bacteria, with the installation of anti-scald devices and tempering valves to prevent hot water injuries.

What is the maximum temperature for a water heater?

A new water heater is typically preset to a maximum temperature of 140 degrees Fahrenheit. Some say that’s the ideal temperature, while others argue that it’s better to reduce the maximum temperature to 120.

Is 125 degrees to hot for water heater?

What’s a safe temperature for water? On the side of most water heaters, you’ll find a warning that says water temperatures of 125 degrees Fahrenheit can cause burns or death. To be safe, the water coming out of the plumbing fixtures in a home shouldn’t be any hotter than 120 degrees.

You might be interested:  Quick Answer: How Long For Water Heater To Heat?

Does turning up water heater make hot water last longer?

Turn up the thermostat on the hot water heater. One of the easiest ways to make a hot shower last longer is by using less hot water while it’s at a higher temperature. To do this, turn up the temperature on the thermostat that’s attached to the hot water heater tank. Be conscious of other hot water in your home.

What temperature should I set my hot water heater ABC?

Know the Ideal Setting: The best setting for gas water heaters is around 115 to 120 degrees Fahrenheit. Oftentimes, water heaters will have additional options to either lower or increase the temperature of the water inside. In the case of the video’s water heater, A, B and C each have an increase of about 10 degrees. 6

Does turning down the temperature on a water heater save money?

Homeowners will find that by turning down their hot water tank temperature by about 20 degrees to 120 Fahrenheit or 48 Celsius, they will see cost savings of about 6 to 10 percent.

What temp should you set your thermostat in winter?

For winter, the ideal thermostat temperature is 68 degrees Fahrenheit when you’re at home. Energy.gov 68 degrees is a good room temperature while you’re awake at home, but recommends lowering it while you’re asleep or away. Lowering your thermostat 10-15 degrees for eight hours can reduce your heating bill by 5-15%.

What temperature is too cold for a house?

The World Health Organization (WHO) recommends indoor temperatures of at least 64°F (you can drop that down to 62°F at night if you’re really looking to save on your heating bill). But if you have infants, sick or elderly people in your household, then it’s recommended that you keep the thermostat set at 70°F.

You might be interested:  Question: How To Replace A Thermocouple On A Whirlpool Gas Water Heater?

What temperature should heating be at night?

The ideal temperature for a home ranges between 20 and 21ºC during the day, and between 15 and 17ºC at night.

Leave a Reply

Your email address will not be published. Required fields are marked *